Dialysate Line with Flow Restrictor

Enables the Physician to prescribe treatment specific to the individual

MPC-728 Dialysate Line with Flow Restrictor
MPC-728

Part Number MPC-728
Configuration Straight Line w/Flow Restrictor
Components (2) White Female Hansen Connectors and
(1) Flow Restrictor
Use In-Series Tandem Dialysis
Packaging Individually Packaged

The flow restrictor can be used to progressively vary the flow resistance and the rate of dialysate flow through the system. The positioning of
the flow restrictor should be based on the reading provided by indicators associated with the dialysis machine. The flow restrictor will remain in whatever position it is placed in by the operator.

Picture depicts patented product

When the flow restrictor is engaged, the dialysate flow through the restrictor provides
the pressure differential for large ultrafiltration in dialyzer # 1, yielding additional convective removal of middle weight molecules. As the flow resistance of the MPC-728 is increased, the dialysate pressure in the dialysate compartment of dialyzer # 2, is
at a very high rate while the dialysate pressure in the dialysate compartment of Dialyzer # 1 is at a very low rate, thus permitting an increase in fluid ultrafiltration from the blood to the dialysate in dialyzer # 1 and backfiltration
of dialysate to the blood in dialyzer # 2. Therefore mimicking the natural kidney.

The volumetric control in the dialysis machine will ensure the balance of fluid, accounting for proper removal of fluid gained
by the patient since the
preceding dialysis.

Since it will be possible to variably control the rate of ultrafiltration and backfiltration by adjusting the flow restrictor, it will be possible to apply this treatment to a larger number of patients with a wide range of attainable blood flows. This also provides a method for individualizing the treatment for each patients' needs.

Diagram of MPC-728 Process

Home  |  Company Background  |  Fax Order Form  | E-Mail  |  Contact UsLinks and Resources 

Manufactured by Molded Products, Inc.
Harlan, Iowa  51537
(800) 435-8957 Phone
(800) 227-7935 Fax